Respironics SmartMonitor2 Operator's Manual page 29

Menu Option LCD Display
Bradycardia BRADY
for Record RECORD LIMIT
BPM
Pre/Post PRE/POST
Time TIME in seconds
Impedance RECORD
Record? IMPEDANCE?
Record RECORD RESP
Respiration RATE?
Rate
Heart rate RECORD
Record? HEARTRATE?
Description of Option or Instructions
Allows active waveforms to be recorded during a
bradycardia event prior to activation of the
Bradycardia alarm.
Values:
OFF, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100
beats per minute
Standard value: OFF
When in Event Mode and the Bradycardia Alarm
is set to 70 BPM and the Bradycardia for Record
is set to 80 BPM, the system will perform as
follows:
For a heart rate of >80 BPM, no waveforms will
be recorded and no alarm will occur.
For a heart of >70 BPM and <80 BPM,
waveforms will be recorded but no alarm will
occur.
For a heart rate of <70 BPM, waveforms will be
recorded and an alarm will occur.
This parameter allows the user to prescribe both
the number of seconds that waveforms are
recorded prior to the occurrence of a physiologic
event and after the event has terminated.
PRE defines the number of seconds that
waveforms will be recorded prior to the event.
POST defines the number of seconds that
waveforms will be recorded after the event has
terminated.
Values:
30/15, 30/60, 45/45, 60/30, 30/30, 75/15, 60/15,
45/15 seconds
Standard value: 30/15 seconds
This parameter allows the user to select whether
or not the respiration waveform will be recorded.
Values:
YES or NO
Standard value: YES
This parameter allows the user to select whether
or not the Breath-To-Breath & the Average
Respiration Rates will be recorded.
Values:
YES or NO
Standard value: YES
This parameter allows the user to select whether
or not the Beat-To-Beat & the Average Heart
Rates will be recorded.
Values:
YES or NO
Standard value: YES
Setting Alarm and Recording Limits
Menu Path
All Menus
Record Menu
All Menus
Record Menu
All Menus
Record Menu
All Menus
Record Menu
All Menus
Record Menu
23