BDI OCTAVE 8377 User Manual

Product Registration

Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today, and you will be entered to win free a BINK
table from BDI: www.bdiusa.com/register

Placement and Maintenance

Your Octave Console is designed for indoor use on level floors.
Clean wood veneer and steel parts with a moist cloth.
Octave is engineered for easy assembly. Carefully follow this procedure
to prevent any damage. Do not use power tools for assembly of this
product.

Step 1

Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, contact BDI Customer Service at: customerservice@bdiusa.com.
For all other concerns, please contact your BDI retailer.
C1 Sub-frame
Designed by BDI Studio.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Octave & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2016, BDI
Made in China. 09.08.2017 V3
OCTAVE
8377/8379
™
3 DOOR & 4 DOOR CONSOLE
bdiusa.com
customerservice@bdiusa.com
T1 Phillips Screwdriver x 1
T2 Hex Wrench x 1
H1 1/4-20 x 40 mm
Machine Screw x 14
H2 12mm wood
Screw x 4
H3 KLEET™ Cord Wrap x 2
C5 Back Panels x 2
A1 Cabinet x 1
[quad (shown)
or triple wide]
C3 Middle Shelf x 1
(Quad only)
C4 Side Shelf x 2
(Quad only)
C2 Leg Frame x 2