Advertisement
eNet
Radio energy sensor, 1-gang intermediate plug
Manual commissioning
Repeater mode
Transmission mode
Settings, channel
Parameters
Manual commissioning
Transmit voltage
Transmit current
Transmit effective output
Transmit apparent output
Transmit idle output
Transmit absolute effective
energy
Effective energy
32582202
10499462
On, Off
Basic setting: On
On, Off
Basic setting: Off
Single, Double
Basic setting: Double
Setting options, Basic
setting
On, Off
Basic setting: On
On, Off
Basic setting: On
On, Off
Basic setting: On
On, Off
Basic setting: On
On, Off
Basic setting: On
On, Off
Basic setting: On
On, Off
Basic setting: On
-1073741823...1073741823
Wh
Basic setting: 0 Wh (Current
value)
13.03.2014
Blocks manual commissioning
for all device channels. In the
"Off" setting, the device
cannot be reset to the factory
setting.
In addition to its other
functions, the device can be
used as a repeater. In the
"On" setting, the device
repeats all the received
telegrams.
The transmission of all
measured value telegrams is
repeated to guarantee
increased transmission
security (no unsecured
transmission). It is possible to
switch over to simple
transmission.
Explanations
Blocks manual commissioning
for the device channel. In the
"Off" setting, the device
cannot be reset to the factory
setting.
Transmits the current voltage
value.
Transmits the current current
value.
Transmits the average
effective output. If negative
values are displayed, then
effective output is fed in, e.g.
via a photovoltaic system.
Transmits the current
apparent output value.
Transmits the current value of
the basic oscillation idle
output. If negative values are
displayed, this is a capacitive
idle power. Positive values
show an inductive idle power.
Transmits the cumulative
value of the effective energy. If
negative values are displayed,
then effective energy is fed in,
e.g. via a photovoltaic system.
Displays the currently
cumulated effective energy.
The value can be reset to 0 or
set to any other value.
4/7
Advertisement
