Add/Edit A Service - ZyXEL Communications XMG3512-B10A User Manual

The following table describes the labels in this screen.
Table 80 Security > Firewall > Protocol
L ABEL
Add New
Protocol Entry
Name
Description
Ports/Protocol
Number
Modify
16.3.1 Add/ Edit a Se rvic e
Use this screen to add a customized service rule that you can use in the firewall's ACL rule configuration.
Click
Add Ne w Pro to c o l Entry
display the following screen.
Fig ure 109
The following table describes the labels in this screen.
Table 81 Security > Firewall > Protocol: Add/Edit
L ABEL
Service Name
Description
Protocol
Source/
Destination Port
Protocol
Number
DESC RIPT IO N
Click this to add a new service.
This is the name of your customized service.
This is the description of your customized service.
This shows the IP protocol (
that defines your customized service.
another IP protocol.
Click the icon to edit the entry.
Edit
Click the icon to remove this entry.
De le te
or the edit icon next to an existing service rule in the
Security > Firewall > Protocol: Add/Edit
DESC RIPT IO N
Enter a unique name (up to 32 printable English keyboard characters, including spaces) for your
customized port.
Enter a description for your customized port.
Choose the IP protocol (
from the drop-down list box. Select
These fields are displayed if you select
Select to specify one port only or
Sing le
customized service. If you select
Type a single port number or the range of port numbers that define your customized service.
This field is displayed if you select
Enter the protocol number of your customized port.
XMG3512-B10A User's Guide
Chapter 16 Firewall
, , , or
T C P UDP IC MP T C P/ UDP
and the protocol number displays if the service uses
O the r
, , ,
T C P UDP IC MP IC MPv6
to be able to enter a protocol number.
O the r
or
T C P UDP
to specify a span of ports that define your
Ra ng e
, the service is applied to all ports.
Any
as the protocol.
O the r
184
) and the port number or range of ports
Pro to c o l
or ) that defines your customized port
O the r
as the IP port.
screen to