C Ha Pte R 9 Ro Uting; Overview; The Routing Screen - ZyXEL Communications XMG3512-B10A User Manual

9.1 O ve rvie w
The XMG usually uses the default gateway to route outbound traffic from computers on the LAN to the
Internet. To have the XMG send data to devices not reachable through the default gateway, use static
routes.
For example, the next figure shows a computer (
routes most traffic from
route to connect to services offered by your ISP behind router
communicate with a separate network behind a router
Example of Routing Topology
Fig ure 59
A
R3
9.2 T he Ro uting Sc re e n
Use this screen to view and configure the static route rules on the XMG. Click
> Sta tic Ro ute
Network Setting > Routing > Static Route
Fig ure 60
to the Internet through the XMG's default gateway (
A
LAN
to open the following screen.
XMG3512-B10A User's Guide
C
) connected to the XMG's LAN interface. The XMG
A
. You create another static route to
R2
connected to the LAN.
R3
R1
WAN
R2
124
HA PTER
Ro uting
). You create one static
R1
Ne two rk Se tting > Ro uting
9