ZyXEL Communications XMG3512-B10A User Manual page 115

Table 29 Network Setting > Home Networking > LAN Setup (continued)
L ABEL DESC RIPT IO N
LAN IPv6 Mode Setup
IPv6 Active Select
Ena b le
Link Local Address Type
EUI64 Select this to have the XMG generate an interface ID for the LAN interface's link-local address
using the EUI-64 format.
Manual
Select this to manually enter an interface ID for the LAN interface's link-local address.
Lan Global Identifier Type
EUI64 Select this to have the XMG generate an interface ID using the EUI-64 format for its global
address .
Manual
Select this to manually enter an interface ID for the LAN interface's global IPv6 address.
LAN IPv6 Prefix Setup
Delegate prefix Select this option to automatically obtain an IPv6 network prefix from the service provider or an
from WAN uplink router.
Static Select this option to configure a fixed IPv6 address for the XMG's LAN IPv6 address.
MLD Snooping Multicast Listener Discovery (MLD) allows an IPv6 switch or router to discover the presence of
MLD hosts who wish to receive multicast packets and the IP addresses of multicast groups the
hosts want to join on its network.
Active Select
Ena b le
passing through it and learn the multicast group membership. It helps reduce multicast traffic.
MLD Mode Select
Sta nda rd Mo de
receive it.
Select
ML D Mo de
LAN IPv6 Select how you want to obtain an IPv6 address:
Address Assign
•
Sta te le ss
Setup
Daemon) is enabled to have the XMG send IPv6 prefix information in router advertisements
periodically and in response to router solicitations. DHCPv6 server is disabled.
•
Sta te ful
the XMG act as a DHCPv6 server and pass IPv6 addresses to DHCPv6 clients.
•
Sta te le ss a nd Sta te ful
LAN IPv6 clients can obtain IPv6 addresses either through router advertisements or through
DHCPv6.
LAN IPv6 DNS Select how the XMG provide DNS server and domain name information to the clients:
Assign Setup
•
Fro m Ro ute r Adve rtise m e nt
advertisements.
•
Fro m DHC Pv6 Se rve r
•
Fro m RA & DHC Pv6 Se rve r
advertisements and DHCPv6.
DHCPv6 Configuration
DHCPv6 Active This shows the status of the DHCPv6.
a DHCPv6 server which assigns IPv6 addresses and/or DNS information to clients.
IPv6 Router Advertisement State
RADVD Active This shows whether RADVD is enabled or not.
IPv6 DNS Values
IPv6 DNS Server Select
Fro m ISP
1-3
Select
Use r- De fine d
addresses the XMG passes to the DHCP clients.
Select
No ne
Chapter 8 Home Networking
to activate the IPv6 mode and configure IPv6 settings on the XMG.
to activate MLD Snooping on the XMG. This allows the XMG to check MLD packets
to allow the XMG to forward MLD packets only to ports that want to
to allow the XMG to block MLD packets for a specific multicast group.
: The XMG uses IPv6 stateless autoconfiguration. RADVD (Router Advertisement
: The XMG uses IPv6 stateful autoconfiguration. The DHCPv6 server is enabled to have
: The XMG uses both IPv6 stateless and stateful autoconfiguration. The
: The XMG provides DNS information through router
: The XMG provides DNS information through DHCPv6.
: The XMG provides DNS information through both router
DHC Pv6 Se rve r
if your ISP dynamically assigns IPv6 DNS server information.
if you have the IPv6 address of a DNS server. Enter the DNS server IPv6
if you do not want to configure IPv6 DNS servers.
XMG3512-B10A User's Guide
115
displays if you configured the XMG to act as