Hirschmann RS20 Reference Manual page 46

Time
Parameter
Anycast destination ad-
dress
VLAN ID
Anycast send interval
Disable Server at local
time source
Table 6: Configuration SNTP Server
IP destination Send SNTP packets
address periodically to
0.0.0.0 Nobody
Unicast Unicast
224.0.1.1 Multicast
255.255.255.255 Broadcast
Table 7: Periodic sending of SNTP packets
Parameter
External server
address
Redundant server
address
Server request interval Enter the time interval at which the device requests SNTP packets
Accept SNTP Broad-
casts
Threshold for obtaining
the UTC
Disable Client after
successful synchroni-
zation
Table 8: Configuration SNTP Client
46
Meaning
Enter the IP address to which the SNTP server on the device sends the
SNTP packets.
Enter the VLAN to which the device may periodically send
SNTP packets.
Enter the time interval at which the device sends SNTP packets (valid
entries: 1 second to 3600 seconds, on delivery: 120 seconds).
Enables/disables the SNTP server function if the status of the time
source is "local" (see Time dialog).
Meaning
Enter the IP address of the SNTP server from which the device
periodically requests the system time.
Enter the IP address of the SNTP server from which the device period-
ically requests the system time, if it does not receive a response to a
request from the "External server address" within 0.5 seconds.
(valid entries: 1 second to 3600 seconds, on delivery: 30 seconds).
Specify whether the device accepts the system time from SNTP Broad-
cast/Multicast packets that it receives.
Reduces the frequency with which the time changes. Enter the
threshold in milliseconds. The device changes the time as soon as the
deviation from the server time is above this threshold.
Enable/disable further time synchronizations once the device has
synchronized its time with the server.
3.1 SNTP configuration
RM Web L2B
Release 5.0 04/09