Hirschmann RS20 Reference Manual page 17

Basic Settings
1
Figure 5: Device status and alarm display
1 - Symbol indicates the Device Status
2 - Cause of the oldest existing alarm
3 - Time of the oldest existing alarm
System data
This area of the website displays the system parameters of the device.
Here you can change,
– the system name,
– the location description,
– the name of the contact person for this device,
– the availability of the media modules
– the temperature threshold values.
Name
Name
Location
Contact person
Basic module
Media module 1
Media module 2
Media module 3
Media module 4
Media module 5
Media module 6
Media module 7
Power supply (P1/P2)
Operating time
Temperature
Table 1: System data
RM Web L2B
Release 5.0 04/09
2 3
Meaning
System name of this device
Location of this device
Contact person for this device
Hardware version of the basic module
Hardware version of media module 1
Hardware version of media module 2
Hardware version of media module 3
Hardware version of media module 4
Hardware version of media module5
Hardware version of media module 6
Hardware version of media module 7
Status of the power supply units
Time that has elapsed since the device was last restarted.
Temperature in the device. Lower/upper temperature thresh-
old values. If the temperature goes outside this range, the
device generates an alarm message.
(see fig. 6) and
1.1 System
17