Snmpv1/V2 Access Settings - Hirschmann RS20 Reference Manual

Security

2.2 SNMPv1/v2 Access Settings

With this dialog you can select access via SNMPv1 or SNMPv2. In the state
on delivery, both protocols are activated.
You can thus manage the device with HiVision and communicate with earlier
versions of SNMP.
You can thus communicate with earlier versions of SNMP.
Note: For displaying the entries of the dialog you need read-write access.
In the "Index" column, you enter the current number to which the access
restriction applies.
Enter the password with which this computer may access the device in
the "Password" column. Please note that passwords are case-sensitive.
This password is independent of the SNMPv3 password.
In the "IP Address" column, you enter the IP address which may access
the device. No entry in this field, or the entry "0.0.0.0", enables access to
the device from computers with any IP address. In this case, the only ac-
cess protection is the password.
In the "IP Mask" column, much the same as with network masks, you can
select a group of IP addresses.
Example:
255.255.255.255: a single IP address
255.255.255.240 with IP address = 172.168.23.20:
the IP addresses 172.168.23.16 to 172.168.23.31.
38
2.2 SNMPv1/v2 Access Settings
RM Web L2B
Release 5.0 04/09