Powering The Device; Powering The Device Via The Obd Socket - TEXA Nagivator Nano Technical Manual

10.2 Powering the Device

The internal battery within the device powers the LED light
only; make sure the device is powered correctly during
diagnosis.
The device can be powered in any of the following three ways:
via the diagnosis connector
•
directly from the battery
•
• through lighter cable
The green LED remains on (does not flash) if the device is
being powered properly.
Do not use external batteries that are not
electrically connected to the vehicle you are working on.

10.2.1 Powering the Device via the OBD Socket

The device can be powered via the OBD socket of the vehicle
being tested.
For more information on how to connect the device
to the vehicle diagnostic socket consult the chapter
"Connecting to the Control Unit".
The green LED remains on (does not flash) if the device is
being powered properly.
en
35