INSTALLATION MANUAL OF THE TMD MK3 EDR ACCESSORIES REVIEW OF THE MANUAL This document is revision 08 of the TMD MK3 EDR accessories technical manual. Issue date: 30/03/2018...
Reading and understanding the following manual will help you avoid damages to things or personal injury caused by improper use of the product. TEXA S.p.A reserves the right to make any changes deemed necessary to improve the manual for any technical or marketing requirement; the company may do so at any time without prior notice.
Computers, printers, cameras, Pocket PCs etc. The Bluetooth, WiFi and HSUPA interfaces search for compatible electronic devices based on the radio signals they emit and establish a connection. TEXA tools only select and prompt compatible TEXA devices. This does not exclude the presence of other sources of communication or disturbance.
4 TMD MK3 SOS The TMD MK3 SOS button is a device through which you can use TMD MK3 EDR to send an assistance request to the Operations Centre. The device can be used in case of an emergency, a panic attack, a sudden illness of the driver.
4.1 Technical Features Model: TMD MK3 SOS Manufacturer: TEXA S.p.A. ARM Cortex M0 with LIN BUS type CPU: interface Visible warnings: Adjustable intensity red LED Audible warnings: Built-in electronic buzzer Power supply: 12 Vdc Length of connection cable: 2.5 m 0.75 mAdc in standby mode (no LED)
R&TTE 1999/5/EC (complete system analysis) and RoHS 2011/65/EU directives. A complete copy of the Declaration of Conformity can be found at TEXA S.p.A., Via 1 Maggio 9, 31050 Monastier di Treviso (TV), Italy...
Proceed as follows: 1. Secure TMD MK3 SOS in the most appropriate position*. 2. Connect the TMD MK3 SOS cable to the Y-shaped cable. 3. Insert the connector of the Y-shaped cable into the L1 input of TMD MK3 EDR.
4.4 Use The transmission of an assistance request through TMD MK3 SOS is subject to the following limitations: • only 1 time between the vehicle's ignition (instrument panel on) and shutdown (instrument panel off), • at the most 99 times within a day (24 h).
5 TMD MK3 PRIVACY The TMD MK3 PRIVACY button is a device through which you can disable the geolocation using TMD MK3 EDR. TMD MK3 PRIVACY is equipped with: • built-in green LED, • a warning buzzer, • a connection cable. Do not use aggressive cleansers, especially alcohol, to clean the device.
5.1 Technical Features Model: TMD MK3 PRIVACY Manufacturer: TEXA S.p.A. ARM Cortex M0 with LIN BUS type CPU: interface Visible warnings: Adjustable intensity green LED Audible warnings: Built-in electronic buzzer Power supply: 12 Vdc Length of connection cable: 2.5 m 0.75 mAdc in standby mode (no LED)
R&TTE 1999/5/EC (complete system analysis) and RoHS 2011/65/EU directives. A complete copy of the Declaration of Conformity can be found at TEXA S.p.A., Via 1 Maggio 9, 31050 Monastier di Treviso (TV), Italy...
5.3 Installation The additional Y-shaped cable (code 3904674) is needed for the installation. Position the device in a way it does not compromise or interfere with driving, but also easy to reach in case of an emergency. 1. TMD MK3 EDR 2.
5.4 Use Simply press the button to activate / deactivate the geolocation. When pressing the button, you will see visible warnings through the LED and hear audible warnings through the built-in electronic buzzer. The device's functionality and the way it is used can be customised based on specific needs.
6 TMD MK3 ACTUATOR LOCK TMD MK3 ACTUATOR LOCK is a device that, if active, inhibits the actuator it is connected to. For example, the device can be connected in order to inhibit the vehicle's ignition. In this case, the device is activated automatically by TMD MK3 through the interaction with the Driver Recognition Kit.
R&TTE 1999/5/EC (complete system analysis) and RoHS 2011/65/EU directives. A complete copy of the Declaration of Conformity can be found at TEXA S.p.A., Via 1 Maggio 9, 31050 Monastier di Treviso (TV), Italy...
6.3 Installation The additional Y-shaped cable (code 3904674) is needed for the installation. Install the TMD MK3 ACTUATOR LOCK inside the engine compartment and away from heat sources. The TMD MK3 ACTUATOR LOCK central unit must be easy to reach in case of an emergency deactivation.
TMD MK3 EDR to send a request for assistance to the Operations Centre. The device can be used in case of an emergency, a panic attack, a sudden illness of the driver. TMD MK3 SOS is equipped with: • a built-in red LED, • a warning buzzer, •...
R&TTE 1999/5/EC (complete system analysis) and RoHS 2011/65/EU directives. A complete copy of the Declaration of Conformity can be found at TEXA S.p.A., Via 1 Maggio 9, 31050 Monastier di Treviso (TV), Italy...
7.4 Installation The additional Y-shaped cable (code 3904674) is needed for the installation. Other specific interconnection cables can be provided upon request. Position the device in a way it does not compromise or interfere with driving, but also easy to reach in case of an emergency. 1.
7.5 Use The device is highly configurable via firmware. A specific function can be assigned to each button. An example of configuration is the following: • keeping the SOS button pressed for an extended amount of time allows the transmission of a request for assistance to the Operations Centre; •...
8 TMD MK3 MULTIREADER TMD MK3 MULTIREADER is a device through which you can use different technologies for the recognition of a badge. For example, through the personal badge, the device allows you to identify who is driving the vehicle in which the device is installed. TMD MK3 MULTIREADER is equipped with: •...
R&TTE 1999/5/EC (complete system analysis) and RoHS 2011/65/EU directives. A complete copy of the Declaration of Conformity can be found at TEXA S.p.A., Via 1 Maggio 9, 31050 Monastier di Treviso (TV), Italy...
8.3 Description 1. Reader for NFC technology 2. Track reader for Magnetic Stripe technology 3. LED unit: • Blue LED • Green LED • Red LED 4. Video camera for Barcode technology reading and proximity sensor 5. Connector...
8.4 Installation The additional Y-shaped cable (code 3904674) is needed for the installation. Other specific interconnection cables can be provided upon request. Position the device in a way it does not compromise or interfere with driving, but also easy to reach in case of an emergency. 1.
8.5 Use The device is highly configurable via firmware. The technologies the device is equipped with allow you to recognise the badge: • by putting it close to the presence sensor, • by swiping its magnetic stripe through the specific slot, •...
9 TMD MK3 KEYLESS The TMD MK3 KEYLESS key fob is a device that, combined with TMD MK3 EDR, allows you to verify the presence of the keys inside the vehicle once it is returned. TMD MK3 KEYLESS is made up of two parts: •...
9.2 Regulatory Information Simplified EU Declaration of Conformity The manufacturer, TEXA S.p.A, declares that the type of radio equipment TMD MK3 KEYLESS is compliant with the RED 2014/53/ EU and RoHS 2011/65/EU directives. The complete text of the EU declaration of conformity is available at...
9.3 Inserting the Battery Before using the device, you must insert its battery. Proceed as follows: 1. Remove the key fob from the 2. Separate the key fob's top casing support. from the bottom one. 3. Flip over the top casing and insert 4.
9.4 Installation 1. TMD MK3 EDR 2. TMD MK3 KEYLESS The communication between the TMD MK3 EDR and the TMD MK3 KEYLESS takes place via Bluetooth. The pairing among the two devices may be automatic or follow a procedure that can be customised based on specific needs.
9.5 Use Park the vehicle and turn off the engine, then fit the key fob with the keys attached onto the support. Once this operation is complete, the device communicates, via Bluetooth, to the TMD MK3 EDR that the keys have been positioned inside the vehicle correctly. At this point, based on the accessories installed and on the customisation of their firmware, you may, for example, automatically lock the doors once you get out of the vehicle and then use an identification badge to access the vehicle...
10 TMD MK3 TEXA SHARE TMD MK3 TEXA SHARE is a device through which you can manage the use of a car that is part of a company fleet. Using the company badge, the device allows you, for example, to indicate if the vehicle you intend to use can be reserved and if so to activate the door unlock function.
10.2 Regulatory Information Simplified EU Declaration of Conformity The manufacturer, TEXA S.p.A, declares that the type of radio equipment TMD MK3 TEXA SHARE is compliant with the RED 2014/53/EU (complete system analysis) and RoHS: 2011/65/EU directives. The complete text of the EU declaration of conformity is available at...
10.3 Description 1. RGB LED (back side of the device) • Green: available • Yellow: not available • RED: busy • Blue: maintenance 2. NFC technology reader (back side of the device) 3. Connector 4. Function-buttons • A-I • A-II •...
Proceed as follows: 1. Secure TMD MK3 TEXA SHARE in the most appropriate position*. 2. Connect the TMD MK3 TEXA SHARE cable to the Y-shaped cable. 3. Insert the connector of the Y-shaped cable into the L1 input of TMD MK3 EDR.
10.5 Use The device is highly configurable via firmware. An example of a possible use is the following: 1. Place the badge close to the vehicle's windscreen in correspondence of the NFC technology reader. 2. Wait for the LED indication: •...
11 TMD MK3 PRIVACY BTLE The TMD MK3 PRIVACY BTLE button is a device through which you can disable the geolocation using TMD MK3 EDR. TMD MK3 PRIVACY BTLE is equipped with: • a built-in green / red LED, • a warning buzzer. Do not use aggressive cleansers, especially alcohol, to clean the device.
11.2 Regulatory Information Declaration of conformity The manufacturer, TEXA S.p.A, declares that the type of radio equipment TMD MK3 PRIVACY BTLE is compliant with the RED 2014/53/EU and RoHS: 2011/65/EU directives. The complete text of the EU declaration of conformity is available at...
11.3 Inserting the Battery Before using the device, you must insert its battery. Proceed as follows: 1. Position the device with the 2. Unlock the upper case by delicately button facing upwards. turning it counter clockwise. 4. Flip over the upper case and insert the 3.
Page 56
ATTENTION: Risk of explosion if the battery is replaced with another one of the wrong type. Dispose of the batteries following the instructions.
11.4 Installation 1. TMD MK3 EDR 2. TMD MK3 PRIVACY BTLE The communication between the TMD MK3 EDR and the TMD MK3 PRIVACY BTLE takes place via Bluetooth. The pairing among the two devices may be automatic or follow a procedure that can be customised based on specific needs.
11.5 Use Simply press the button to activate / deactivate the geolocation. When pressing the button, you will see visible warnings through the LED and hear audible warnings through the built-in electronic buzzer. The device's functionality and the way it is used can be customised based on specific needs.
12 TMD I/O EXPANDER TMD I/O EXPANDER is a TMD MK3 accessory device which expands its functions by increasing the number of power ports. The device is designed to meet the needs of the Car Sharing market and it is can be easily recognised among the other TMD devices thanks to its orange label.
12.1 Description 1. P1: 6-way connector to connect the door opening / closing control and TMD BLINKER cable (code 3908243). 2. P2: connector not used and not connected to the rest of the device. 3. P3: 4-way connector to connect the actuator lock control (code 3908244). 4.
12.2 Technical Features Model: TMD I/O EXPANDER Manufacturer: TEXA S.p.A. ARM Cortex M0 with LIN BUS type CPU: interface Bistable relay. Relay output: 10 Adc maximum with Inhibitory control*: inductive load Coil nominal voltage: 12 Vdc Auxiliary outputs: Two 750 mAdc, 12 Vdc outputs...
Page 62
(*) The output protection (inhibitory control) is transferred to the fuses installed in the vehicle's electrical circuit. TMD I/O EXPANDER Dimensions [mm]: TMD BLINKER • TMD I/O EXPANDER : 92 g Weight: • TMD BLINKER: 52 g (including cable)
12.3 Regulatory Information Simplified EU Declaration of Conformity The manufacturer, TEXA S.p.A, declares that the type of radio equipment TMD I/O EXPANDER is compliant with the RED 2014/53/ EU directive. The complete text of the EU declaration of conformity is available at...
12.4 Installation The installation requires the use of some additional cables for the connection to TMD MK3 EDR. Assemble the TMD I/O EXPANDER inside the engine compartment and away from heat sources. The TMD I/O EXPANDER must be easy to reach in case of an emergency deactivation.
Page 65
Below only the connections between TMD MK3 EDR, TMD I/O EXPANDER and the related cables are indicated See the specific installation sheet for the vehicle you are working on for a complete and correct installation. Proceed as follows: 1. Secure TMD I/O EXPANDER in the most appropriate position. 2.
14 LEGAL NOTICES TEXA S.p.A. Via 1 Maggio, 9 - 31050 Monastier di Treviso - ITALY Tax Code - Company Register of Treviso ID No. - VAT No.: 02413550266 Single-shareholder company subject to the direction and coordination activities of Opera Holding S.r.l.