Camera; Positioning The Device With Respect To The Sensor - TEXA RDC Tool Manual

9.4 Camera

The camera the device is provided with has autofocus.
You can activate the camera by pressing the button
positioned on the icon of the specific function.
By pressing on the button a second time, the device is forced to autofocus again.
The camera is used by specific software functions also.
For further information consult the Software's Operating Manual.

9.5 Positioning the Device with Respect to the Sensor

You must place the device at the proper distance and position from the sensor
in order to optimise the communication between them.
The distance may vary sensibly based on the type of sensor and on
the wheel rim it is installed on.
Proceed as follows:
1. Put the device close to the tyre's valve as indicated in the figure, without
touching the wheel rim.
The average distance you should keep to perform the test is approximately 0
- 3 cm.
26
when you are