TEXA Nagivator Nano Technical Manual page 40

POWER SUPPLY CABLE
The tool can be powered via a power supply cable
connected to specific diagnosis cables.
1. Device
2. Motorcycle adapter
3. Diagnosis cable
4. Battery clamps (with superseal connector)
Proceed as follows:
1. Connect the device to the adapter.
2. Connect the diagnosis cable to the adapter.
3. Connect the clamps to the cable.
4. Connect the clamps to the vehicle battery.
This power supply mode can also be used on cars and
commercial vehicles using suitable adapters and diagnosis
cables.
The same connection procedure applies to all.
38