Table of Contents
Advertisement
Quick Links
SUMMARY
1 Revision of the Manual.......................................................................................3
INTRODUCTION.....................................................................................................4
2 LEGEND OF THE SYMBOLS USED.................................................................5
3 SPECIFIC SAFETY RULES FOR INSTALLING TMD MK5 FPT.......................6
3.1 Glossary..................................................................................................................6
3.2 General Rules..........................................................................................................7
3.3 Operator Safety.......................................................................................................8
3.4 Device Safety..........................................................................................................9
3.5 Safety during the Installation.................................................................................11
4 OPERATION OF THE RADIO DEVICES.........................................................13
5 NORMATIVE INFORMATION..........................................................................14
6 TMD MK5 FPT..................................................................................................16
7 DESCRIPTION.................................................................................................17
8 TECHNICAL FEATURES.................................................................................18
9 INSTALLATION................................................................................................20
9.1 Suggestions for a Correct Installation....................................................................21
9.2 Positioning TMD MK5 FPT....................................................................................22
9.3 Power Supply Connections...................................................................................23
9.4 Checking the Installation.......................................................................................24
10 BLINK CODES...............................................................................................25
10.1 LED flashes with the Instrument panel On..........................................................25
10.2 Flashes of the Blue LED......................................................................................26
...............................................................................................................................27
12 MAINTENANCE.............................................................................................28
13 ENVIRONMENTAL INFORMATION..............................................................29
14 LEGAL NOTICES...........................................................................................30
1
Advertisement
Table of Contents
Related Manuals for TEXA TMD MK5
Summary of Contents for TEXA TMD MK5
-
Page 1: Table Of Contents
SUMMARY 1 Revision of the Manual..................3 INTRODUCTION.....................4 2 LEGEND OF THE SYMBOLS USED..............5 3 SPECIFIC SAFETY RULES FOR INSTALLING TMD MK5 FPT.......6 3.1 Glossary........................6 3.2 General Rules......................7 3.3 Operator Safety.......................8 3.4 Device Safety......................9 3.5 Safety during the Installation.................11 4 OPERATION OF THE RADIO DEVICES............13 5 NORMATIVE INFORMATION................14... -
Page 3: Revision Of The Manual
TMD MK5 FPT INSTALLATION MANUAL 1 Revision of the Manual This document includes the assembly instructions for the product: TMD MK5 . Document Review Number: 02 Date of Issue: 31/05/2021... -
Page 4: Introduction
TEXA S.p.A reserves the right to make any changes deemed necessary to improve the manual for any technical or marketing requirement; the company may do so at any time without prior notice. -
Page 5: Legend Of The Symbols Used
2 LEGEND OF THE SYMBOLS USED Toxic material hazard Risk of crushing hands Explosive material hazard Floor level obstacle warning Electric shock hazard Laser beam hazard Electromagnetic field hazard Low temperature danger - freezing Flammable material hazard General Risk Hot surface hazard Obligation to read the instructions Corrosive substance hazard Safety glasses required... -
Page 6: Specific Safety Rules For Installing Tmd Mk5 Fpt
The personnel in charge of installing the remote diagnostic tools are required to follow the general safety rules, to use TMD MK5 FPT devices for their intended use only and to carry out the maintenance as described in this manual. -
Page 7: General Rules
3.2 General Rules The operator must have carefully read all the information and instructions in the technical documents provided with the tool. If the operator is not able to read this manual, the operating instructions and safety indications must be read and discussed in the operator's native language. •... -
Page 8: Operator Safety
3.3 Operator Safety Carefully evaluate the device's installation position. An improper installation may cause severe damage and injuries. Safety Measures: • Make sure the installation does not compromise the correct functioning of the vehicle's controls, in particular the brakes and, in general, the safety devices. The device was manufactured to be electrically safe and insulated and to work with specific supply voltage levels. -
Page 9: Device Safety
3.4 Device Safety The device was manufactured to be mechanically resistant. Careless use and excessive mechanical strain may impair its efficiency. Safety Measures: • Do not drop, shake or knock the device. • Do not place objects over the cables nor bend them. •... - Page 10 The electromagnetic compatibility tests carried out on the device guarantee that it can be adapted to the technologies normally used on vehicles (e.g. engine control, ABS, airbag, etc.). Nevertheless, if malfunctions occur, contact the vehicle's dealer. In particular, the device's proper operation could be compromised by covering the antenna with shielding objects and/or materials.
-
Page 11: Safety During The Installation
3.5 Safety during the Installation The installation of the device was carefully tested by qualified personnel in TEXA. You must follow some indications provided by the vehicle manufacturer in order to install the device correctly. Safety Measures: • Follow the indications provided in the vehicle's manual carefully to disassemble the plastic parts and the access to the compartments. - Page 12 • Do not spread out the wiring with the cables stretched. • Do not spread out the wiring in walkable areas or in areas that are subject to friction without the necessary protections; • For the installation you must use only the wiring and the components provided with the device. •...
-
Page 13: Operation Of The Radio Devices
The Bluetooth and LTE interfaces look for compatible electronic devices according to the radio signal they emit and establish a connection between them. TEXA tools select and only prompt you with compatible TEXA devices. This does not exclude the presence of other sources of communication or disturbance. -
Page 14: Normative Information
5 NORMATIVE INFORMATION Simplified EU Declaration of Conformity The manufacturer, TEXA S.p.A., declares that the type of TMD MK5 FPT radio equipment is compliant with the following directives: • RED 2014/53/UE The complete text of the EU declaration of conformity is available at the following Internet address http://www.texa.it/download. -
Page 16: Tmd Mk5 Fpt
6 TMD MK5 FPT TMD MK5 FPT is a GPS tracking device able to communicate via Bluetooth with other diagnostic devices. The TMD MK5 FPT Kit includes: • TMD MK5 FPT. • Wiring for the electrical connection. • Installation manual. -
Page 17: Description
7 DESCRIPTION 1. Fixing hole 2. L1 - Accessory and power connector 3. LED: a) red LED b) Blue LED c) green LED 4. USB device connector 5. Fixing hole 6. Fixing hole To install additional devices, consult the user and installation manual provided in the packages of the individual devices. -
Page 18: Technical Features
8 TECHNICAL FEATURES Manufacturer: TEXA S.p.A. Brand: Model: TMD MK5 FPT CPU: AM3352 CORTEX A8 RAM: 256 MB FLASH: 256 MB GPRS module: GPRS 2G and CAT-M1 GPS, GLONASS, Galileo and QZSS GPS module: module service device type USB 2.0, BT 4.2, LIN... - Page 19 ECE / ONU R10 Regulations and Directives: RED 2014/53/EU RoHS 2011/65/EU ETSI EN 301-489-1 ETSI EN 301-489-19 ETSI EN 301-489-52 Electromagnetic Compatibility: ETSI EN 301-489-17 ISO 7637-1 ISO 7637-2 ETSI EN 300 328 ETSI EN 301 511 Radio Systems: ETSI EN 303 413 ETSI EN 301 908-13 EN 62311 Electrical Safety:...
-
Page 20: Installation
9 INSTALLATION The following chapters describe the device's installation phases. Please read this manual thoroughly before proceeding with the installation. The installation must be performed by qualified personnel only. The installation must be carried out following the indications provided in the specific installation sheet for the vehicle you are working on. -
Page 21: Suggestions For A Correct Installation
3 metres. TMD MK5 FPT must be placed in a position that allows an easy connection of the diagnostic wiring yet maintaining an appropriate distance that does not expose the device to the direct heat from the engine. -
Page 22: Positioning Tmd Mk5 Fpt
9.2 Positioning TMD MK5 FPT Once you have located the connection points to the power supply lines, you must find the most suitable place to fasten the device. When positioning the device, you must respect the following general rules: • It must be far from sources of heat •... -
Page 23: Power Supply Connections
9.3 Power Supply Connections To power TMD MK5 FPT use the specific cable provided (code 3903929) with the device. Do not connect the connector to TMD MK5 FPT until the entire system is completed. Use the cable with the loose wires. -
Page 24: Checking The Installation
Proceed as follows: 1. Connect the TMD MK5 FPT power supply connector and turn the vehicle ignition key to the “ON” position. 2. Wait for the red LED on the TMD MK5 FPT to start flashing. -
Page 25: Blink Codes
(ex.: military areas). ² TEXA CLOUD CONNECTION NOT VALID: This could be due to a problem with the telephone or Internet service providers caused by ordinary / extraordinary maintenances on the network, by the weather conditions or by the passage in an area not covered by the GPRS signal. -
Page 26: Flashes Of The Blue Led
10.2 Flashes of the Blue LED Below is the explanation regarding the correct reading of the flashes of the blue LED: Status No Bluetooth communication. Blue Flashing Device in communication via Bluetooth. -
Page 27: Indications In Case The Vehicle Is Not Used For A Long Time
Refer to the instructions provided in the user and maintenance manual if the vehicle is not used for a long time. If the vehicle is not used for a long period of time, you may disconnect TMD MK5 FPT from the power supply. -
Page 28: Maintenance
• Make sure the connections are not damaged, oxidised, exposed to atmospheric agents, water and humidity. • Make sure all screws and bolts used to fasten TMD MK5 FPT are not damaged and are properly tightened. If the wiring or the connections have been exposed to atmospheric agents, water and moisture, proceed with the waterproofing. -
Page 29: Environmental Information
13 ENVIRONMENTAL INFORMATION Do not dispose of this product with other undifferentiated solid waste. For information regarding the disposal of this product please see the pamphlet supplied. -
Page 30: Legal Notices
14 LEGAL NOTICES TEXA S.p.A. Via 1 Maggio, 9 - 31050 Monastier di Treviso - ITALY Tax Code - Company Register of Treviso ID No. - VAT No.: 02413550266 Single-shareholder company subject to the direction and coordination activities of Opera Holding S.r.l.