Table of Contents
Advertisement
10.4.1 Connecting via Bluetooth
The wireless connection eliminates the communication cable
with the display unit, making the tool more practical to use.
The serial number to use in order to configure Bluetooth
communication can be found on the label behind the OBD
connector.
The blue LED flashes:
During the configuration phase of the Bluetooth communication.
•
During communication between the tool and the viewing unit,
•
during data transmission.
For a correct configuration we recommend
powering the tool (making sure the green LED is on)
before launching the configuration procedure of the
software.
For more information regarding the configuration
procedure consult the Software Operating Manual.
42
Advertisement
Table of Contents
