Panasonic FP-M Hardware Manual page 215

Address Name
Target
DT9104
value
DT9105
area 0
Target
DT9106
High-speed
value
DT9107
counter
area 1
board
Elapsed
channel 0
DT9108
value
area
DT9109
area
Capture
DT9110
value
DT9111
area
Target
DT9112
value
DT9113
area 0
Target
DT9114
High-speed
value
DT9115
counter
area 1
board
Elapsed
channel 1
DT9116
value
area
DT9117
area
Capture
DT9118
value
DT9119
area
• These registers are performed for storing data of the high-speed counter
board.
• The target values 0 and 1, elapsed value, and capture value are
processed in binary in the range of K-8,388,608 to 8,388,607.
Notes:
F1 (DMV)
• Be sure to use the
special data registers to other registers or data in other registers to
these special data registers.
• When changing data in these special data registers, be sure to specify
data in the range of K-8,388,608 to K8,388,607.
If data outside the range is input, data is handled disregarding bit
positions 24 to 31 (bit positions 8 to 15 in the higher 16-bit area of 32-bit
data).
<EXAMPLE>
If K2,147,483,647 is specified, high-speed counter acts regarding it as
K-8,388,608.
Data configuration when K2,147,483,647 is input:
Higher 16-bit area
Bit position
31 28 27
• • • •
Binary data 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Data in bit positions 24 to 31
is ignored.
Description
instruction to transfer data in these
24 23 20 19 16 15 12
• • • • • •
K-8,388,608
8-7. Special Data Registers
Lower 16-bit area
11 8 7 4 3 0
• • • • • •
207