High-Speed Counter Board Specifications - Panasonic FP-M Hardware Manual

3) High-speed counter board specifications

Item
Counter Counter channels
specifications Max. counting speed
Counting range
Number of target value
settings
Input Input mode
specifications
Number of input points
Rated input voltage
Input voltage range
Insulation method
ON voltage
OFF voltage
Min. input pulse width
Input delay time
Input current
Input type
Output Number of output points
specifications Rated load voltage
Load voltage range
Insulation method
Output type
Max. load current
Residual voltage
Leakage current
Response time ON → OFF
2 channels (CH 0, CH 1)
1-phase mode: 20 kHz
2-phase mode: 5 kHz
–8,388,608 to +8,388,607
2 points/channel
3 modes (2-phase/4-time multiplication mode, individual input
mode, directional input mode)
* The mode is set using the input mode selector.
3 points (INA, INB, RESET) × 2 channels
2 points (RST.E, O.INH) × 2 channels
24 V DC
21.6 to 26.4 V DC
Optical coupler
19.2 V DC or less
4.8 V DC or more
50 µs at INA and INB inputs
2.5 ms at RESET input
1 ms or less at RST.E and O.INH inputs
Approx. 7.5 mA at INA, INB, and RESET inputs
Approx. 5 mA at RST.E and O.INH inputs
Source
2 points (OUT 0 and OUT 1)
24 V DC
21.6 to 26.4 V DC
Optical coupler
Transistor PNP or NPN open collector
200 mA
1.5 V or less
100 µA or more
1 ms or less
OFF → ON 1 ms or less
8-1. Performance Specifications
Description
175