Installation
Precautions
● B efore removing, turn the main power of the unit off.
● When installing or removing the terminal board, exercise care to avoid injury.
There may be some sharp-pointed solder joints on the rear side of the board that could cause
unexpected injury.
● W hen installing the board, fully insert the Board into the slot horizontally until it is firmly plugged
into the connector.
Note that incomplete insertion may damage the internal components.
■
Compatible slot: SLOT1, SLOT2, SLOT3
■
Installation Procedure
1
Turn off the display and the connected equipment, and disconnect the power supply plugs from the
wall sockets.
Disconnect all cables connected to the unit.
2
F ollowtheprocedurebelowandinstalltheterminalboardinthedisplay.
To install
1. Remove the slot cover.
Securing screw
•MakesurethattheBoarddoesnotrideonthetwolowerclaws.
•Besuretofastenallscrewstightly.
•HavethecustomerkeeptheremovedTerminalBoardforfutureservicingneeds.
Great user manuals database on
2. Insert the terminal board until it is
firmly plugged into the connector.
Tighten screws in the order
2
4
Foammatorthicksoftcloth
UserManuals.info
3. A ffixtheterminalfunction
1
4
-
.
1
3
To remove
Removethescrews.Gripthehandleofthe
terminal board, and slowly pull out in the
direction of the arrow.
label(included).
3