Option Card Mk3C; Option Card Mk3B (Secondary Position Feedback For Absolute Encoders When Using Vlt 5000 Flux) - Danfoss VLT 5000 Operating Instructions Manual

Option card MK3C

1 Homing completed
2 Referenced position
reached
3 Error occurred
4 Reference index bit 0
5 Reference index bit 1
6 Reference index bit 2
7 Reference index bit 3
8 Reference index bit 4
9 24V DC
10 COM
Option card MK3B
(secondary position feedback for absolute encoders when using VLT 5000 Flux)
5V DC
1
COM
2
A1
3
/A1
4
B1
5
6 /B1
7 Z1
/Z1
8
MG.50.P3.02 - VLT is a registered Danfoss trademark
Positioning Controller
Active high. This output is always high if an absolute encoder is
specified in P713
Active high. This output is set when the target position is reached
according to the setting of P746.
Active high. This output is set every time an error occurs. It is
cleared every time a successful error clear is carried out. This
output will remain high as long as the Power recovery function is
selected (P736) and active.
Active high. Mirror of the currently locked-in reference index bit 0.
Not used in field bus mode.
Active high. Mirror of the currently locked-in reference index bit 1.
Not used in field bus mode.
Active high. Mirror of the currently locked-in reference index bit 2.
Not used in field bus mode.
Active high. Mirror of the currently locked-in reference index bit 3.
Not used in field bus mode.
Active high. Mirror of the currently locked-in reference index bit 4.
Not used in field bus mode.
Encoder supply
Encoder supply
Incremental encoder
A-track
A-track inverted
B-track
B-track inverted
Zero-track
Zero-track inverted
Absolute encoder
Clock out
Clock out inverted
Data in
Data in inverted
Not used
Not used
15