3.2.2
Associating G3 I/O adapter and I/O Node number and setting I/O
loop scan speed
In PUM12, available I/O Node numbers are variable. Follow the steps below to
associate I/O Node number of G3 I/O adapter with a cannel number. Also,
setting I/O loop scan speed for each G3 I/O adapter.
Open Module Parameter of the controller
Select [Controller], and select [File]-[Module parameters] from the menu.
Figure 3-9 Module parameter selection screen of the controller
Unified Controller nv series G3 I/O Adapter GA932 Module Instruction Manual
3.2 Setting with the Engineering Tool
27