Inspection; Daily Inspection - Toshiba G3 Instruction Manual

6.1

Inspection

6.1.1

Daily inspection

For daily inspection, check the following.
CAUTION
Remark
• To keep the system normal and avoid unnecessary troubles, perform daily inspections, regular
inspections, and cleaning.
■ Front panel
<LED>
Check if each of the LED's is visible. If not, clean it with a soft cloth. Be careful
not to change the switch settings. Check the LED state from the front side.
■ Ventilation hole
Check the front panel and upper ventilation hole of the product for dust or
stain. If the ventilation hole is blocked by dust or stain, remove the dust with a
vacuum cleaner, and then wipe it with a soft cloth.
■ Indoor environment
Check if the temperature and humidity of the location where the product is
located are within the product specification range (Table A-1 in Appendix A).
When there is any smoke or strange odor,
turn off the power.
Otherwise, it may cause a fire or electric shock.
Unified Controller nv series G3 I/O Adapter GA932 Module Instruction Manual

6.1 Inspection

Mandatory
49