Chapter 5 Troubleshooting
Display the state of I/O Node.
To check the state of an I/O Node, select the controller from the system view
(station status) and click [I/O Node] button, or double-click [I/O Status] area
for the controller. The typical alarm states of I/O Node and I/O module are
displayed by I/O Node.
42
42
6F8C1590
Select a controller
Figure 5-3 Starting the system view (I/O Node status)
Figure 5-4 System view (I/O Node status) screen
Double-click
Click the button