Toshiba G3 Instruction Manual page 9

Introduction
This manual describes the overview, installation, operation and maintenance/inspection of
G3 I/O adapter module (hereafter called "GA932 module" or simply called "GA932). This
module connects I/O (G3 I/O) of PROSEC T series T3/T3H into Unified Controller nv series
type 1 light (PUM12). To use this device correctly, read "Safety precautions" first. For this
product, the repair and replacement due to wear or abrasion will be charged even during the
warranty period.
The manuals for GA932 module are as follows.
• Unified Controller nv series type 1 light Users manual – Basic hardware-
describes the main unit hardware of nv series type 1 light controller.
• Unified Controller nv series type 1 light Function Manual
Describes the functions and basic use of nv series type 1 light.
• Unified Controller nv series type 1 light T series Migration Hardware Manual
Describes how to migrate from T series to nv series type 1 light.
• Unified Controller nv series type 1 light T series Migration Guide
Describes how to convert the system data from T series to nv series type 1 light.
• Unified Controller nv series/Integrated Controller V series
Programming Instructions
Describes the detailed specifications of the instruction words of the program languages
(LD, FBD, SFC, ST) supported by the nv series and Integrated Controller V series.
• Unified Controller nv series/Integrated Controller V series Engineering Tool 4 -Basic-
Describes how to create, debug, print, and save programs using nV-Tool.
• Unified Controller nv series/Integrated Controller V series Engineering Tool 4 -Setup-
Describes the method to set up nV-Tool.
• Unified Controller nv series High-speed Serial I/O System
TC-net I/O Instruction Manual
Describes TC-net I/O system, which is nv series high-speed serial I/O system.
• PROGRAMMABLE CONTROLLER PROSEC T3H USER'S MANUAL
Describes T3/T3H main unit system. Also describes General purpose digital I/O,
Analog I/O , and G3 I/O except Special I/O.
Note
Please refer to the instruction manual of each module about special G3 I/O (Transmission module)
The figure used in the explanation is inserted to make it easier to understand of the
reader, and it is not necessarily the same as the actual product. Please understand we
may carry out improvement without particular notice in order to improve performance
and function.
Unified Controller nv series G3 I/O Adapter (GA932) Module Instruction Manual
(6F8C1497)
(6F8C1498)
(6F8C1619)
(6F8C1587)
(6F8C1226)
(6F8C1290)
(6F8C1291)
(6F8C1240)
(UM-TS03***-E032)
vii