Ordering Codes And Accessories - THORLABS ITC1 Series Operation Manual

equipment other than those specified by Thorlabs GmbH. The correction of interference
caused by such unauthorized modification, substitution or attachment will be the re-
sponsibility of the user.
The use of shielded I/O cables is required when connecting this equipment to any and all
optional peripheral or host devices. Failure to do so may violate FCC and ICES rules.
Attention
Mobile telephones, cellular phones or other radio transmitters are not to be used within
the range of three meters of this unit since the electromagnetic field intensity may then
exceed the maximum allowed disturbance values according to IEC 61326-1.
This product has been tested and found to comply with the limits according to
IEC 61326-1 for using connection cables shorter than 3 meters (9.8 feet).

1.2 Ordering Codes and Accessories

ITC102 OEM Laser Diode and Temperature Controller, ±200 mA / 12 W
ITC110 OEM Laser Diode and Temperature Controller, ±1 A / 12 W
ITC133 OEM Laser Diode and Temperature Controller, ±3 A / 18 W
ITC100D Control and Display Panel for the ITC100 Series; removable
ITC100F Front Plate for ITC100D
ITC100P Female 64pin DIN Connector
CAB430 Cable for a LD and TEC Controller with 15-Pin D-Sub Connector to a Laser Di-
ode Mount, 1.5 m
© 2018 Thorlabs GmbH
1 General Information
5