Certifications And Compliances - THORLABS ITC1 Series Operation Manual

8.5 Certifications and Compliances

Category Standards or description
EC Declaration of Meets intent of Directive 2004/108/EC
Conformity - EMC demonstrated to the following specifications as listed in the Official Journal of the European
Communities:
EN 61326-1:2006
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-6
EN 61000-3-2
Complies with the Radiocommunications Act and demonstrated per EMC Emission standard
Australia / New Zeal-
2,3,4:
and Declaration of
Conformity
AS/NZS 2064
FCC EMC Compli- Emissions comply with the Class A Limits of FCC Code of Federal Regulations 47, Part 15,
ance
Subpart B
1 Replaces 89/336/EEC.
2 Compliance demonstrated using high-quality shielded interface cables shorter than or equal to 3 meters, including CAB400
cable installed at the CONTROL OUT port and with CAB430 cable installed at the LD/TEC port.
3 Compliance demonstrated with ITC100 series and DISP100 board modules installed in a Thorlabs PRO8000 mainframe unit
(with PRO8000 display disabled).
4 Emissions, which exceed the levels required by these standards, may occur when this equipment is connected to a test object.
5 Minimum Immunity Test requirement.
6 MOD IN port capped at IEC 61000-4-3 test.
© 2018 Thorlabs GmbH
Electrical equipment for measurement, control and laboratory use –
EMC requirements:
Immunity: complies with basic immunity test requirements
Emission: complies with EN 55011 Class A Limits
Electrostatic Discharge Immunity (Performance Criterion B)
Radiated RF Electromagnetic Field Immunity (Performance Criterion
6
B)
Electrical Fast Transient / Burst Immunity (Performance Criterion B)
Conducted RF Immunity (Performance Criterion B)
AC Power Line Harmonic Emissions
Industrial, Scientific, and Medical Equipment: 1992
2,3,4
.
1
for Electromagnetic Compatibility. Compliance was
8 Appendix
2,3,5
.
2,3,4
39