Table of Contents
Advertisement
4. Setup is currently installing
the utility.
5. After the installation is
completed, click "Fin-
ish".
Chapter 8 Supported Software
Chapter 8
Note:
The following illustrations are the TPC series hotkey guide for you to adjust the bright-
ness of your touch panel. Please follow the steps below to complete the setting.
1. After the TPC Series Hotkey Driver is installed successfully, the system will execute the util-
ity automatically when you power on the computer. You can find the four hotkeys on the
bottom right side of the screen.
2. Click the utility twice to bring up the backlight brightness setting.
3. Enter the value for the backlight brightness for both day and night modes. The default set-
ting is 3 (Day) and 8 (Night). 1 means the darkest level and 10 means the brightest level.
62
www.dfi.com
Advertisement
Table of Contents
