INSTALLATION MANUAL
Engine Installation and Initial Engine Alignment
Models With 8 Degree Down Angle Transmissions - Velvet Drive or ZF / Hurth
1. Remove the engine cover.
2. Attach a suitable sling to lifting eyes on engine and adjust so that engine is level when
suspended.
Center lifting eye on top of thermostat housing is used for engine alignment only.
Do not use to lift entire engine.
3. Lift engine into position in boat using an overhead hoist.
Page 20 of 77
b
a -
Front Lifting Eye
b -
Rear Lifting Eye
c -
Center Lifting Eye
CAUTION
c
a
77912
90-864198020
INDEX