Exhaust System Hose / Tube Connections - Mercury MX 6.2 MPI Installation Manual

INSTALLATION MANUAL

Exhaust System Hose / Tube Connections

Avoid exhaust hose failure. Discharge water from exhaust elbow must flow around
entire inside diameter of hose to avoid causing hot spots which could eventually
result in burned-through exhaust hoses. Exhaust hoses and/or tubes must be cor-
rectly connected to exhaust elbows so that they do not restrict the flow of discharge
water from exhaust elbow.
IMPORTANT: Exhaust hoses/tubes should be secured at each connection with at
least 2 hose clamps.
1. Tighten all exhaust hose and/or exhaust tube clamps securely.
IMPORTANT: S-pipes must be routed under the transmission mounts.
Tow Sports Models
Page 32 of 77
Correct Connection
a - Hose Clamps
a - S-pipe
b - Transmission Mount
CAUTION
Incorrect Connection
a
a
b
INDEX
71653
73961
74832
90-864198020