Rohs2 Compliance; Warranty; B.4 Rohs2 Compliance - Michell Instruments Condumax II Installation Operation & Maintenance

Condumax II Sampling System -
NEC Compatible IOM Manual
B.4

RoHS2 Compliance

Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011
The Restriction of Hazardous Substances (RoHS) Directive places rules upon European
manufacturers of electrical and electronic equipment. The directives' aim is to reduce
the impact that electronic devices have on the environment.
According to the EC Directive 2002/95/EC, Michell Instruments' products qualify as
Category 9, Control and Monitoring Equipment. Under the 2002/95/EC Directive,
Category 9 products are exempt from compliance with the Directive.
However, the careful design of all Michell Instruments' products takes into consideration
the requirements of the Directive and, wherever possible, compliance is achieved. All
future products will be developed entirely using compliant materials. Furthermore,
Michell Instruments is taking active steps to remove non-compliant materials and
components from existing products wherever these may occur. Presently, none of the
non-compliant materials are known to occur in Michell Instruments' products.
The new Directive 2011/65/EU (RoHS2) entered into force on 21 July 2011 and required
all Member States to transpose the provisions into their respective national laws by 2
January 2013.
Under the provisions of the RoHS2 EU Directive 2011/65/EU (Article 3, [24]) defines
'Control and Monitoring Equipment' specifically as 'monitoring and control instruments
designed exclusively for industrial or professional use'.
RoHS2 EU Directive 2011/65/EU states the closing date for compliance of any Control
and Monitoring Equipment product sold into the EU market place as 22nd July 2017.
However, the careful design policy of all Michell Instruments' products continues to
attain compliance in the shortest practical timescales and strives to ensure that less than
0.1% of total mass per product, of all non-compliant materials, appear within them.
Michell Instruments continues to monitor suppliers and material sources to ensure that
compliance of goods provided is maintained.
January 2013
B.5

Warranty

Unless otherwise agreed, the Supplier warrants that, as from the date of delivery for
a period of 12 months, the goods and all their component parts, where applicable, are
free from any defects in design, workmanship, construction or materials.
The Supplier warrants that the services undertaken shall be performed using reasonable
skill and care, and be of a quality conforming to generally accepted industry standards
and practices.
Except as expressly stated, all warranties whether express or implied, by operation
of law or otherwise, are hereby excluded in relation to the goods and services to be
provided by the Supplier.
All warranty services are provided on a return to base basis. Any transportation costs
for the return of a warranty claim shall reside with the Customer.owner's approval to
proceed, the product will be repaired and returned.
Michell Instruments
APPENDIX B
21