Maintenance; Maintenance Schedule; Disinfecting And Cleaning The Body Restraints; Disinfecting And Cleaning The Mattress - Ferno 24 User Manual

6.1 Maintenance Schedule

The cot requires regular maintenance. Set up and follow a maintenance
schedule. The table at right represents minimum intervals for
maintenance. Keep maintenance records. For a sample record sheet, see
"Maintenance Record" on page 23.
When using maintenance products, follow the manufacturers' directions
and read the manufacturers' material safety data sheets.
6.2 Disinfecting and Cleaning
the Restraints
Remove the restraints from the cot. Disinfect and clean only as directed
in the users' manuals provided with the restraints. Additional, free users'
manuals can be obtained from Ferno. See "Ferno Customer Relations"
on page 2.
6.3 Disinfecting and Cleaning
the Mattress
Replace the mattress if it is ripped, punctured or damaged.
1. Remove the mattress from the cot.
2. To disinfect: Apply disinfectant to the mattress, following the
disinfectant manufacturer's instructions for application method
and contact time.
To clean: Wash the mattress with warm, soapy water and a soft
3.
cloth. Rinse the mattress with clear water. Hang the mattress to
dry, or dry it with a towel.

6.4 Disinfecting the Cot

Wipe all surfaces with disinfectant. Follow the disinfectant manufacturer's
instructions for application method and contact time. Ferno recommends
you inspect the cot for damage as you disinfect it.

6.5 Cleaning the Cot

1. Remove the restraints and mattress from the cot.
2. Hand clean all surfaces of the cot with warm water and a mild
detergent.
3. Rinse with warm, clear water. Dry the cot with a towel or allow it
to air-dry.

6.6 Waxing the Cot

While it is not necessary to wax this cot, waxing the aluminum main
frame or legs will not damage them, and will help maintain the cot's
appearance.
Disinfect and clean the cot before applying wax. Use an automotive wax
as directed by the wax manufacturer.
© Ferno-Washington, Inc. / 234-0008-09 / February 2018

Maintenance

6 - MAINTENANCE
Improper maintenance can cause injury. Maintain the cot
only as described in this manual.
Disinfecting (this page)
Cleaning (this page)
Waxing (this page)
Inspecting (page 18)
Lubricating (page 18)
Disinfectants and cleaners containing bleach, phenolics, or
iodines can cause damage. Do not use products containing
these chemicals.
Water under high pressure, or steam, can penetrate joints,
flush away lubricant, and cause corrosion. Use caution when
cleaning moving parts such as joints and hinges, and reapply
lubricant if needed. See "Lubricating the Cot" on page 19.
Using abrasive cleaning compounds or applicators on the
cot can cause damage. Do not use abrasive materials to
clean the cot.
WARNING
Minimum
Maintenance
Each Use
•
NOTICE
As Needed Monthly
•
•
• •
•
17