Table of Contents
Advertisement
MAINTENANCE PROCEDURES
5. Reinstall dipstick, push in com-
pletely.
6. Remove dipstick again and read oil
level. It should be between marks.
lmr2007-053-100_a
1. Full
2. Add
3. Operating range
7. Add oil up to have the level between
marks as required.
To add oil:
– Unscrew oil cap
– Place a funnel into the opening
– Add the recommended oil to the
proper level.
NOTE: Do not overfill.
smo2007-002-005_b
MODELS WITH ENGINE COVER
1. Oil filling cap
smo2007-002-007_b
MODELS WITHOUT AN ENGINE COVER
1. Oil filling cap
______________
88
NOTE: Every time oil is added in en-
gine, the complete procedure ex-
plained previously must be done (en-
gine restarted, idling for 30 seconds,
30 seconds waiting time and then,
rechecking the oil level). Otherwise,
you will have a false oil level reading.
8. Properly reinstall oil cap and dip-
stick.
Engine Oil Change and Oil Filter
Replacement
The oil change and filter replacement
should be performed by an authorized
Sea-Doo dealer.
Engine Coolant
Recommended Engine Coolant
Always use ethylene-glycol antifreeze
containing corrosion inhibitors specifi-
cally for internal combustion aluminum
engines.
NOTE: When available, it is recom-
mended to use biodegradable an-
tifreeze compatible with internal com-
bustion aluminum engines. This will
contribute to protect the environment.
Cooling system must be filled with wa-
ter and antifreeze solution (50% dem-
ineralized water, 50% antifreeze).
BRP sells premixed coolant with freez-
ing protection up to -37°C (-35°F)
(P/N 293 600 038).
To prevent antifreeze deterioration, al-
ways use the same brand. Never mix
different brands unless cooling system
is completely flushed and refilled. Re-
fer to an authorized Sea-Doo dealer.
Engine Coolant Level
WARNING
Check coolant level with engine
cold. Never add coolant in cooling
system when engine is hot.
Advertisement
Table of Contents
