Table of Contents
Advertisement
OPERATING INSTRUCTIONS
WARNING
Always
perform
OPERATION
operating the watercraft. Become
thoroughly familiar with all con-
trols and the function of each.
Should any control or instruction
not be fully understood, refer to an
authorized Sea-Doo dealer.
Principle of Operation
Propulsion
The engine is directly coupled to a
drive shaft which, in turn, rotates an
impeller. This impeller is accurately
adjusted in a housing where the water
is drawn up from underneath the wa-
tercraft. Then the water flows through
the impeller to a venturi. The venturi
accelerates the water and produces
thrust to move the watercraft. De-
pressing the throttle lever increases
engine speed and therefore watercraft
speed.
TYPICAL
WARNING
Whenever the engine is to be
started, the operator and passen-
ger(s) should always be properly
sitting on the watercraft and be
wearing protective clothing in-
cluding a Coast Guard approved
PFD and a wet suit bottom.
PRE-
the
CHECKS
before
Keep away from intake grate while
engine is on. Items such as long
hair, loose clothing or personal
flotation device straps can become
entangled in moving parts result-
ing in severe injury or drowning.
TYPICAL
1. Water intake
2. Ride plate
The shift lever should be in the forward
position in order for the watercraft to
advance.
_______________
WARNING
65
Advertisement
Table of Contents
