Launching/Loading - BRP GTX Series Operator's Manual

Personal watercraft
Hide thumbs Also See for GTX Series:
Table of Contents

Advertisement

WARNING
The bungee cords are under ten-
sion and could spring back and
whip someone when released.
Use caution.
NOTE: When trailering 2 watercraft, it
may be necessary to remove the inner
wakeboard rack.
WARNING
Never tow a watercraft with water
remaining in the ballast tanks.
The weight of ballasts increases
the load on the trailer, the axle, and
the tires, which could lead to pre-
mature wear or failure. This also
contributes to reduce the stabil-
ity of your vehicle on the road by
raising the center of gravity of the
trailer. Always completely empty
the ballast tanks before trailering.

Launching/Loading

NOTICE
Before launching the wa-
tercraft, ensure the bilge drain plugs
are fully screwed. After loading the
watercraft, ensure they are removed
to drain bilge.
________
SAFETY INFORMATION
________
TRAILERING
25

Advertisement

Table of Contents
loading

Table of Contents