Table of Contents
Advertisement
PRE-RIDE INSPECTION
dle position. With shift lever in reverse
position, gate should be in downward
position.
WARNING
Verify the reverse gate operation
before starting the engine.
Variable Trim System (VTS)
All RXP, RXT-X and WAKE Models
Install DESS key then push arrows
of VTS button to check nozzle move-
ment. The VTS position indicator
movement can also be seen in the
information center.
Storage Compartment
Covers and Seat
Ensure they are closed and latched.
WARNING
Make sure seat is securely latched.
Wakeboard Rack
WAKE Models
WARNING
Ensure rack is properly secured
to watercraft body and that wake-
board is properly positioned and
secured to rack prior to using wa-
tercraft. Ensure straps are in good
condition.
Ski/Wakeboard Post
WAKE Models
Make sure ski/wakeboard post is fully
extended and locked before use.
Completely retract and lock when not
used.
_______
36
Use
boarder in tow as tow rope may
backlash to watercraft when re-
leased. Never perform a sharp
turn when towing a skier, wake-
boarder or any toy.
Ballast Tanks
WAKE Models
Ensure tanks are properly secured
to reboarding platform prior to us-
ing watercraft.
DESS Post and Engine
Start/Stop Button
Position shift lever in neutral. Ensure
that both switches operate properly.
Start engine and stop it using each
switch individually.
Should the DESS key loose or fail
to remain on its post, replace it im-
mediately in order to avoid unsafe
use.
SAFETY INFORMATION
WARNING
caution
with
WARNING
WARNING
________
skier/wake-
Advertisement
Table of Contents
