Advertisement
S T E P
8
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Some components may be pre-assembled. Nylon lock nuts will not fully screw onto bolts,
they must be wrench tighten to fully go on.
7A. Attach Seat Plate (J) to Frame A (A) using:
4 - (#1) M10X25mm Flat Head Cap Screw
4 - (#51) M10 Flat Washer
4 - (#40) M10 Nylon Lock Nut
7B. Attach Seat Pad (#65) to Seat Plate (J) using:
2 - (#6) M10x30mm Hex Head Bolt
2 - (#7) M10x35mm Hex Head Bolt
4 - (#50) 10mm Spring Washer
4 - (#51) M10 Flat Washer
7C. Attach Back Pad (#64) to Frame K (K) using:
2 - (#8) M10x35mm Hex Head Bolt
2 - (#50) 10mm Spring Washer
2 - (#51) M10 Flat Washer
38
Advertisement
