Advertisement
S T E P
2
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Wrench tighten ALL hardware at the end of
STEP
2A. Some components may be pre-as-
sembled. Nylon lock nuts will not fully screw onto bolts, they must be wrench tighten to
fully go on.
2A. Attach Frame B (B) to Weight Stack Frame (WA) using:
4 - (#10) M12X35mm Hex Head Bolt
8 - (#52) M12 Flat Washer
4 - (#41) M12 Nylon Lock Nut
26
Advertisement
