Eneo MSR-24N040004A User Manual page 51

Display > Spot
Set the output of the Spot monitor.
Table 4-22 DEVICE > Display > Spot Item and Description
No. Name
1 Sequence
2 Event Popup
47
Figure 4-21 DEVICE > Display > Spot
Set the channel and dwell time (5, 10, 20, 30sec) when the Auto mode of
Spot Monitor is selected.
Sets the hold time of the full screen image of the channel where the event
occurred (Off, 5, 10, 20, 30sec, Continuous).
If multiple channels have an event at the same time, the event channel is
shown as a spilt screen.
Function