Eneo MSR-24N040004A User Manual page 35

No. Name
6 System start
7 Run
If change video type, system will reboot and all setup go to factory default.
Warning
System > F/W Upgrade
Set the upgraded items of the system.
No. Name
1 Current Version
2 Device

If firmware version in the USB drive is lower than present system version,
system does not display the firmware in the USB drive.
Note

To upgrade through network, recorder must have HDD.
31
Select Easy Installation in starting the system.
Run Easy Installation.
Figure 4-4 SYSTEM > System > F/W Upgrade
Table 4-5 SYSTEM > System > F/W Upgrade Item and Description
Displaying the present tool version.
Connect USB memory that has files to upgrade to the USB port, select files
to upgrade.
Function
Function