Empty Substrate Bin; Lubricate Drill Unit - Javo Plus User Manual

7.3 Empty substrate bin

Procedure:
1. Turn off the machine and remove plug from socket.
2. Remove substrate out of the bin.
3. Clean the blades of the elevator.
4. Take of the cover (see photo).
5. Loosen the wing nut (see picture) and pull the substrate slide out.
6. Wipe substrate from under the machine.
7. Place the substrate slide back in place, tighten the wing nut and place the
cover.
Do not clean with water, but use compressed air and / or a brush.
Do not use sharp tools to prevent tire damage.

7.4 Lubricate drill unit

The drilling unit must be lubricated.
Procedure:
1. Spray the sliding bar (A) after every 320 hours of operation with light
oil.
2. Lubricate grease fitting after every 40 hours of use with a grease gun.
Version 2015-1
User Manual Javo Plus en Plus Extra Potmachine
A
21