Brush Height; Soil Plate In The Soil Bin; Tray Levelling Height - Javo Quickfiller Manual

Brush height

The protective cover (A) must be removed using a door key before the brush height can be adjusted. Once the
protective cover has been removed one clamp (B) must be loosened. Then the brush can be adjusted up and down
using the crank handle (C).

Soil plate in the soil bin

After the tray has been filled with potting soil it moves past a leveller to remove the surplus soil. Remove the
protective cover (A) using the door key and loosen the clamp (B). The height of the leveller can now be adjusted.
Version 2011-4-1
The height of the soil plate (A) in the soil bin can be adjusted to
set the amount of potting soil reaching the elevator.
The soil plate is attached by two wing nuts (B). Loosening these
two wing nuts allows the plate to be position higher or lower.

Tray levelling height

Javo Quickfiller Manual
Page 12