Command To Exit The Ethernet Interface Configuration Mode; Command To Configure Ethernet Interface Ip Addresses; Command To Configure Mac Filter For The Ethernet Interface; Wireless Interface Configuration Mode - Zte W200A User Manual

5.5.2 Command to Exit the Ethernet Interface Configuration Mode

Command mode: Ethernet Interface Configuration Mode
Function: Exit Ethernet interface configuration mode and enter configure Mode
Command format: wlan (config-int-ethernet)# #exit

5.5.3 Command to Configure Ethernet interface IP addresses

Command mode: Ethernet Interface Configuration Mode
Function: Set the IP address of the Ethernet interface
Command format: wlan（config-int-ethernet）#ipaddr A.B.C.D
wlan（config-int-ethernet）#no ipaddr A.B.C.D
Parameter description:
A.B.C.D
A.B.C.D
[second]

5.5.4 Command to Configure MAC filter for the Ethernet Interface

Command mode: Ethernet Interface Configuration Mode
Function: Configure MAC filter for the Ethernet interface
Command format: wlan（config-int-ethernet）#[no] mac-access-group acl-number
direction
Parameter description:
acl-num
direction

5.6 Wireless Interface Configuration Mode

Mode of entry: Enter the interface wlan command in configure mode
Exit mode: Exit and enter configure mode
Chapter Error! Style not defined. Error! Style not defined.
Name Range
1
IP address
2
IP address
Optional
Name Range
1~99
in
5-35
1
A.B.C.D
1 2
[A.B.C.D ]
Description
IP address of an interface
IP address mask of an interface
The additional IP address flag of an
interface
Description
MAC filter entry number bound to the
interface
Bind to the "in" direction of the interface
2
[second]