ZXR10 WAS (V1.0) IP Wireless Access System W200A Wireless Access Point User's Manual
18. show telnet idle-timeout
19. show version
20. show vlan
5.5 Ethernet Interface Configuration Mode
Mode of entry: Enter the interface ethernet command in configure mode
Exit mode: Exit and enter configure mode
Default prompt: wlan (config-int-ethernet)#
Note: In this mode (including the sub-mode), all information can be configured for
relevant interfaces.
5.5.1 Configurations in the Ethernet Interface Mode
Command mode: Ethernet Interface Configuration Mode
Function: Set the mode of rate negotiation for the Ethernet interface
Command format: wlan (config-int-ethernet)# ethernet-mode mode
Parameter description:
mode
Command format: wlan (config) #show snmp traphost
Command mode: Configure mode
Function: Display the configured interval for telnet idle time-out
Command format: wlan (config) #show telnet idle-timeout
Command mode: Configure mode
Function: Display the software version number
Command format: wlan (config) #show version
Command mode: Configure mode
Function: Display configured VLAN information
Command format: wlan (config) #show vlan
Name
Range
10M, autoNeg (100M/10M)
Mode of the Ethernet Interface
5-34
Description