ZXR10 WAS (V1.0) IP Wireless Access System W200A Wireless Access Point User's Manual
isp-name
retry-time
6.
isp-name
timeout
5.4.18 Command to Configure SNMP Module
Mode of entry: Enter the snmp command in configure mode
1.
A.B.C.D
2.
Parameter description:
Name
Range
1~255 characters
1~10
radius-server timeout
Command mode: Configure mode
Function: Set the hold time of the RADIUS authentication of an ISP
Command format: wlan (config) #radius-server timeout isp-name timeout
Parameter description:
Name
Range
1~255 characters
1~65535
snmp access-host
Command mode: Configure mode
Function: Add and delete host IP addresses allowed to access
Command format: wlan (config) #[no] snmp access-host A.B.C.D
Parameter description:
Name
Range
IP address
snmp access-mode
Command mode: Configure mode
Function: Allow all hosts or hosts in the server-list to access this agent
Command format: wlan (config) #snmp access-mode {all|list}
Name of an ISP which has been created.
Number
authentication
Name of an ISP which has been created.
Hold time of the RADIUS authentication
(unit: s)
Host IP addresses (up to 10) in dotted
decimal format (A.B.C.D)
5-22
Description
of
retries
of
RADIUS
Description
Description