ZXR10 WAS (V1.0) IP Wireless Access System W200A Wireless Access Point User's Manual
12. snmp authtrap enable
13. snmp traphost
A.B.C.D
version
5.4.19 Command to Manage Telnet Idle Timeout
Mode of entry: Enter the Telnet idle-timeout command in configure mode
Command mode: Configure mode
Function: Set the automatic exit time when the Telnet window is idle
Command format: wlan (config) #telnet idle-timeout time-value
Parameter description:
time-value
5.4.20 Commands to Upload/download TFTP Files
Mode of entry: Enter the tftp command in configure mode
Command mode: Configure mode
Function: Configure if the SNMP Agent is allowed to send the authentication
failed Trap
Command format: wlan (config) #[no] snmp authtrap enable
Command mode: Configure mode
Function: Add the address of a trap destination host and the trap version number
Command format: wlan (config) #snmp traphost A.B.C.D [version version]
wlan(config)#no snmp traphost A.B.C.D
Parameter description:
Name
Range
IP address
1~2
Name
Range
300~3600 (unit: s)
Addresses of Trap destination hosts
Trap version number
The automatic exit time when the Telnet
window is idle (300s by default)
5-26
Description
Description