Command To Configure Log Print Information - Zte W200A User Manual

A.B.C.D
A.B.C.D
A.B.C.D
3.
index
A.B.C.D
A.B.C.D
A.B.C.D

5.4.13 Command to Configure Log Print Information

Mode of entry: Enter the logmsg command in configure mode
1.
2.
Chapter Error! Style not defined. Error! Style not defined.
Command format: wlan (config) #[no] ip route A.B.C.D
Parameter description:
Name Range
1
IP address
2
Subnet mask
3
IP address
ip pool
Command mode: Configure mode
Function: Configure the IP address pool for the system
Command format: wlan (config) #[no] ip pool index A.B.C.D
3
A.B.C.D
Parameter description:
Name Range
0~9
1
IP address
2
IP address
3
Subnet mask
logmsg all-enable
Command mode: Configure mode
Function: Open or close the log print information in all modules
Command format: wlan (config) #[no] logmsg all-enable
logmsg level
Command mode: Configure mode
Function: Configure the level of log print information to be output
Command format: wlan (config) # logmsg level level-num
5-17
1 2
A.B.C.D
Description
IP address of the host
IP address mask of the host
IP address of the next-hop router
Description
Group number of the IP address pools
Starting IP address of the host address
pool
Ending IP address of the host address pool
Subnet mask of the addresses in an
address pool
3
A.B.C.D
1 2
A.B.C.D