Elation SATURA PROFILE User Manual page 26

EDIT PROGRAM – Record Controller – Working With Built-In Program [continued]
2. Automatic Program Run
• Select "Function Mode".
• Press ENTER to confirm.
• Select "Auto Program".
• Press ENTER to confirm.
• Select "Master" or "Alone".
• Press ENTER to confirm.
• Press MODE/ESC in order to return to the main menu.
3. Program Selection for Auto Pro Part
• Select "Edit Program".
• Press ENTER to confirm.
• Select "Select Programs".
• Press ENTER to confirm.
• Select "Auto Pro Part 1", "Auto Pro Part 2" or "Auto Pro Part 3", and select which
Slave program is to be sent. Selection "Part 1" means, that the Slave unit runs the
same program as the master units.
• Press ENTER to confirm.
• Press MODE/ESC in order to return to the main menu.
4. Program Selection for Edit Program
• Select "Edit Program".
• Press ENTER to confirm.
• Select "Edit Program".
• Press ENTER to confirm.
• Select the desired program. With this function you can edit specific scenes into a
specific program.
• Press ENTER to confirm.
• Press MODE/ESC in order to return to the main menu.
26