Elation SATURA PROFILE User Manual page 25

USER MODE SET – Edit User Mode
Create user defined channel orders allowing the fixture to match the channel order of other
fixtures on the market for easier operation. A total of three user modes may be configured:
User Mode A, User Mode B, and User Mode C.
EDIT PROGRAM – Rec. Controller
The fixture features an integrated DMX-recorder by which you can transmit the programmed
scenes from your DMX-controller to the moving head. Adjust the desired scene numbers via
the encoder (from – to). When you call up the scenes at your controller, they will
automatically be transmitted to the moving head.
EDIT PROGRAM – Record Controller – Working With Built In Programs
A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master unit
can start 3 different Slave units, which run 3 different programs. The Master unit sends the
3 program parts in a continuous loop.
The Slave unit receives data from the Master unit according to the group which the Slave
unit was assigned to. If e.g. a Slave unit is set to "Slave 1" in the menu "Set to Slave", the
Master unit sends "Auto Program Part 1" to the Slave unit.
If set to "Slave 2", the Slave unit receives "Auto Program Part 2".
To start an Auto Program proceed as follows:
1. Slave Setting
• Select "Function Mode".
• Press ENTER to confirm.
• Select "Set to Slave".
• Press ENTER to confirm.
• Select "Slave 1", "Slave 2" or "Slave 3".
• Press ENTER to confirm.
• Press MODE/ESC in order to return to the main menu.
25