Siemens SINAMICS DCM User Manual page 9

Supplement to liability exclusion
We accept no liability for any damage or loss caused by use of the safety functional
examples, information, programs, planning data or performance data described in this
document, irrespective of the legal basis for claims arising from such damage or loss, unless
liability is mandatory, for example, according to the product liability law, in cases of
malfeasance, gross negligence, due to endangerment of life, the body or health, due to
assumption of a guarantee for a product's characteristics of state, due to malicious
concealment of a defect or due to violation of basic contractual obligations. The damages for
a breach of a substantial contractual obligation are, however, limited to the foreseeable
damage, typical for the type of contract, except in the event of intent or gross negligence or
injury to life, body or health. Any change to the burden of proof to your disadvantage is not
covered hereby.
Copyright
Copyright © 2016 Siemens AG. Reproduction or transmissions of these safety function
examples or extracts thereof are forbidden without the express written authority of Siemens
AG.
Manuals and application notes on the Internet
The manuals and application documents are available in the Internet:
Manuals (https://support.industry.siemens.com/cs/ww/en/ps/13298)
The list of general conditions available there include current supplements to the manuals.
The notes included in the general condition lists have a higher priority than the statements
made in the manuals.
Application document for functional safety STO, SS1 (ISO 13849-1)
Compact User Manual, 09/2016, A5E34871844AM
9