Assign An Ip Address - Lantronix xPico Quick Start Manual

Hide thumbs Also See for xPico:

Table of Contents

Note:

For more information about DeviceInstaller, see the

Help.

Assign an IP Address

The unit IP address is set for DHCP by default at the factory. The hardware

address is on the product label. Assign a static IP address if you do not want the

network to assign an IP address to the xPico or do not have a DHCP server on

the network.

1. Click StartPrograms  LantronixDeviceInstaller 4.4

DeviceInstaller. If your PC has more than one network adapter, a

message appears. Select an adapter and click OK.

2. Click the Search icon and select the unit from the list of Lantronix device

servers on the local network. (In case no DHCP server is available, it can

take 30 seconds before an AutoIP address is generated and the unit is

detectable).

3. Click the Assign IP icon

4. Select Assign a specific IP address and click Next.

xPico Development Kit Quick Start Guide

DeviceInstaller Online

Table of Contents

Do you have a question about the xPico and is the answer not in the manual?