Maintenance And Care; Hako System Maintenance - HAKO Hakomatic B1050 Instruction Manual

Maintenance and Care

5 Maintenance and Care
General information
Before proceeding with main-
tenance and care work you are
advised to read and comply
with the Safety Information
chapter!
Compliance with the recommended
maintenance works will give you the
certitude of always having a reliable
machine at disposition.
Daily or weekly maintenance and repair
work may be executed by the driver/op-
erator having been trained accordingly.
Further Hako system maintenance
works have to be executed by qualified
personnel only. Please contact your lo-
cal Hako Service Centre or Hako con-
tract dealer. We cannot be held liable
for damages resulting from non-compli-
ance with these instructions.
Please indicate the machine's serial
number with any enquiry or spare part
order, see paragraph 1.7, Rating plate.
5.1

Hako System Maintenance

The Hako System Maintenance:
• guarantees reliable operability of the
Hako machines (preventive mainte-
nance)
• minimizes operating costs, repair
costs and maintenance costs
• ensures long service life and opera-
bility of the machine
The Hako System Maintenance is
structured in separate modules and de-
termines specific technical work to be
executed as well as the intervals for
such maintenance work. For any specif-
ic maintenance type, the replacement
parts are determined and listed in spare
part kits.
Hako System Maintenance Cus-
tomer:
To be performed by the customer in ac-
cordance to the maintenance and care
instructions contained in the operating
instructions (daily or weekly). The driv-
er/operator will be instructed upon de-
livery of the machine.
Hako System Maintenance I :
(every 250 hours of operation)
To be performed by qualified personnel
of authorised Hako Service Centre in
accordance with the machine-specific
system maintenance including spare
part kit.
Hako System Maintenance II:
(every 500 hours of operation)
To be performed by qualified personnel
of authorised Hako Service Centre in
accordance with the machine-specific
system maintenance including spare
part kit.
Hako System Maintenance III/S:
(every 1000 hours of operation safety
check)
To be performed by qualified personnel
of authorised Hako Service Centre in
accordance with the machine-specific
system maintenance including spare
part kit. Execution of all safety-relevant
inspections according to UVV-BGV-
TÜV-VDE as prescribed by law.
53